Advertisement
About the temperature controls - Profile Models.
ge.com
Not all features are on all models. Your controls will look like one of the following:
J
I
y...........................................................................
_,
F
_ ..................................
\
i
i
i
................]
Non-LCD models
Non-LCD models
LCD models
NOTE: Therefrigerator h shippedwith protective film covering thetemperature controls. I f thisfilm was not
removed duringinstallation, r emove it now.
Thetemperature controlsorepresetin thefoctor_l a t 37°F(3°C)
for therefrigerator compartment a nd O°F M8°C)for thefreezer
compartment. A llow24 hoursfor thetemperaturetostabilize
to thepresetrecommended s ettings.
Refrigerator t emperatures c anbe adjustedbetween 34°Fand 46°F
(2 °Cto 8°C), a nd thefreezer temperatures c anbe adjustedbetween
-6°F and+8°F(-22°Cto -13°C).
To change the Refrigerator temperature:
LCD Models:
Access By: Home > Refrigerator
Activate By: Using the arrows to select the desired
temperature You must press ENTERto set the new
temperature
To change the Freezer temperature:
Access By: Home > Freezer
Activate By: Using the arrows to select the desired
temperature You must press ENTERto set the new
temperature
Once the desired temperature has been set, the displau will
return to the HOME screen and show the set temperatures
underneath the actual temperature display for several
seconds. Severaladjustments may be required. Eachtime you
adjust the controls, allow 24 hours for the refrigerator to reach
the temperature you have set.
Non-LCD Models:
To change the temperature, press and releasethe FREEZER
TEMP/FRIDGE TEMPpad. The SETlight will come on and
the displag will show the set temperature. To change the
temperature, tap either the vor ^ pad until the desired
temperature is displaged.
Once the desired temperature has been set, the temperature
displag will return to the actual refrigerator and freezer
temperatures after 5 seconds. Severaladjustments mag be
required. Eachtime gou adjust the controls, allow 24 hours
for the refrigerator to reach the temperature gou have set.
Thetemperature controlscandispla 9 boththeSETtemperature
aswellas theactualtemperature in therefrigerator and freezer.
Theactualtemperature may vary stightl_t from theSET temperature
basedon usageand operatingenvironment.
Turning the cooling system off:
LCDmodels:Turningthecoolingsystem OFF stopscoolingin both
thefreezer and refrigerator compartments, but doesnot shutoff
electrical p owerto therefrigerator.
LCD Models:
Access By: Home > Options > Information and Settings >
Cooling System Off
Toturn the cooling system back on, press the touch screen
and press the ON button.
Activate By: PressingENTER.
Non-LCD Models:
Pressand release the FREEZER TEMP/FRIDGE TEMPpad.
Press^ to set freezer temperature to 5. The display will
show OFF.To turn the unit back on, press the FREEZER
TEMP/FRIDGE TEMPpad. PressV to set the freezer and
refrigerator temperatures to the preset points of O°F(-18°C)
for the freezer and 57°F(5°C)for the refrigerator.
When the unit is turned back on, it will take up to 24 hours
to stabilize.
LCD Models: Units
The LCDmodels are shipped from the factory with default
settings of Englishunits.
To change to Metric units, select:
Home>Options>Information and Settings>Settings>Units
Metric/English>Hetric.
To change back to Englishunits repeat the above steps and
select Englishat the final step.
NOTE:The help screen has default setting for USand Canada
customers. If you need replacement parts, contact your local
distributor.
Advertisement
