Advertisement
Installation
Instructions
i-_ TURN THE WATER ON AND PLUG IN
THE REFRIGERATOR
Arrange the coil of tubing so that it does not vibrate
against the back of the refrigerator or against the
wall. Push the refrigerator back to the wall.
[_] START THE ICEMAKER
Set the icemaker power switch to the ! position. The
icemaker will not begin to operate until it reaches its
operating temperature of -9°C or below. It will then
begin operation automatically if the icemaker power
switch is in the ! _osition.
switch j
NOTE: In lower water pressure conditions, the water
valve may turn on up to 5 times to deliver enough
water to the icemaker.
29
Advertisement
