Subscribe to Our Youtube Channel
Related Manuals for Sena BS
Summary of Contents for Sena BS
- Page 1 Bluetooth ® Headset & Intercom for Scooters and Motorcycles User's Guide www.sena.com...
-
Page 2: Table Of Contents
CONTENTS 1. INTRODUCTION .................3 7. 3S CONFIGURATION SETTING ............17 Enabling/Disabling Voice Activated Phone Answering ......18 2. PACKAGE CONTENTS ................4 Enabling/Disabling Voice Prompts ............. 18 3. GETTING STARTED ................5 Delete All Bluetooth Pairing Information ............. 18 Installing the 3S on Your Helmet ..............5 Reset to Factory Default Setting .............. -
Page 3: Introduction
• Bluetooth stereo headset for Bluetooth stereo devices such as MP3 players Thank you for choosing the Sena 3S, Bluetooth Headset and Intercom for • Bluetooth stereo headset for Bluetooth GPS navigations Scooters and Motorcycles. With the 3S, you can call handsfree on your •... -
Page 4: Package Contents
2. PACKAGE CONTENTS Status LED (-) Button Pin-hole (Intercom Button) Reset Button Speakers (+) Button USB Power & Data Cable (Phone Button) Microphone Velcro Pads Microphone Sponges for Speakers DC Power Charging & Firmware Upgrade Port 3S Headset... -
Page 5: Getting Started
3. GETTING STARTED Installing the 3S on Your Helmet 1. Place the speaker-microphone unit in the helmet along with the velcro pads, centered to your ear, in the ear pockets of the helmet. Locate the boom microphone as closely as possible to your mouth when wearing the helmet. -
Page 6: Powering On
Powering On Press and hold the (+) Button and the (-) Button at the same time for 1 second to power on. The blue LED turns on and you will hear ascending beeps and “Hello”. Powering Off Press the (+) Button and the (-) Button at the same time. The red LED turns on for about 2 seconds until it turns off completely and you will hear “Goodbye”... -
Page 7: Checking Battery Level
1. The USB power & data cable is also used for firmware upgrade of the 3S. Voice Prompt Indicator 2. The USB wall charger is not included in the package. Any 3rd party USB charger can be used with Sena products if the charger is approved by either When you power on the headset, keep pressing and holding the (+) FCC, CE, IC, or other locally approved agencies that Sena accepts. Please Button and (-) Button simultaneously for about 3 seconds until you hear contact Sena regarding locally approved agencies Sena accepts. -
Page 8: Adjusting The Volume Level
Function Priority Low Battery Warning When the battery is low, the blinking blue LED in stand-by mode turns to The 3S operates in the following order of priority: red and you will hear mid-tone triple beeps and a voice prompt saying (Highest) Mobile Phone “Low battery”. -
Page 9: Operation Quick Reference
Sena 3S Operations Function 4. OPERATION QUICK REFERENCE 5 sec. Sena 3S v1.1 Operations Function 1 sec. 1 sec. 1 press 1 press Bluetooth Power Sena 3S Select Sena 3S Pairing On/Off (Phone, MP3, Power On Power Off GPS) Sena 3S v1.1... - Page 10 Operations Operations Function Function 1 press 1 sec. Answer 2 sec. 2 sec. Music 3 sec. 2 sec. Mobile Phone Voice Command 3 sec. * You can use “Voice Command” and “Redial” only in stand-by mode. 2 sec. Reject...
-
Page 11: Pairing And Using The 3S With Bluetooth Devices
3. Within 2 seconds, press and hold the (+) Button for 1 second, then 2. Search for Bluetooth devices on your mobile phone. Select the Sena the LED turns to blue flashing and the beeps turn to high tone double 3S in the list of the devices detected on the mobile phone. -
Page 12: Bluetooth Stereo Device Pairing
2. If you have a stand alone Bluetooth stereo device, follow the pairing 1st Mobile Phone 2nd Mobile Phone procedure separately. The procedure is the same as the procedure of “Mobile Phone Pairing”. Note: 1. If Bluetooth connection between the headset and a mobile phone is disconnected, press and hold the (+) Button for 3 seconds to recover the Bluetooth connection immediately. - Page 13 Pairing Pairing 3. Search for Bluetooth devices on the GPS navigation screen. Select the Sena 3S in the list of the devices detected on the GPS. A2DP 4. Enter 0000 for the PIN. 5. The GPS confirms that pairing has completed and the 3S is ready to use.
- Page 14 GPS Pairing as Mobile Phone GPS Navigation Mobile Phone If GPS is not only used for turn-by-turn voice instructions but also is your preferred Bluetooth stereo music source, you can pair the GPS to the 3S by following the simple procedures in “Mobile Phone Pairing”. When you do this, the 3S thinks the GPS is a mobile phone.
-
Page 15: Mobile Phone Call Making And Answering
Mobile Phone Call Making and Answering Note: 1. When you have an incoming call, simply press the (+) Button to answer 1. If you are using multipoint mobile phone connection and you have an incoming call from the second phone during the call of the first phone, then the call. you may still receive the call from second phone. In this case, the call from 2. You can also answer the incoming call by loudly speaking any word the first phone is on waiting mode. If you end a call, then it will automatically of your choice if Voice Activated Phone Answering, VOX phone is guide you to the first phone call. -
Page 16: Intercom Conversation
Starting and Ending Intercom Conversation 6. INTERCOM CONVERSATION 1. You can start an intercom conversation with your intercom friend by pressing and holding the (-) Button for 1 second. Pairing with Other 3S Headsets for Intercom 2. To terminate an intercom conversation, press and hold the (-) Button for 1 second again. -
Page 17: Intercom Failure
intercom call. You will also hear a voice prompt saying “Intercom 7. 3S CONFIGURATION SETTING requested”. In this case, the intercom call does not override the mobile phone call because intercom has lower priority than mobile call. You have to hang up the mobile phone call to make or receive an You can set the configuration of the 3S by the voice menu instruction as intercom call. -
Page 18: Enabling/Disabling Voice Activated Phone Answering
Enabling/Disabling Voice Prompts The voice prompts for each menu item are as below: (1) VOX phone Voice Prompt “Voice prompt” (2) Voice prompt Factory Default Enable (3) Delete all pairings Enable / Disable Press the (-) Button (4) Factory reset (5) Exit configuration You can disable voice prompts by configuration setting, but the following voice prompts are always on. -
Page 19: Reset To Factory Default Setting
Reset to Factory Default Setting Press (+) Button Press (-) Button Voice Prompt “Factory reset” “Vox phone” Enable / disable Factory Default “Voice prompt” Enable / disable Execute Press the (-) Button “Delete all pairings” Execute Execute “Factory reset” To restore factory default settings on the 3S, press and hold the (+) Button until you hear a voice prompt, “Factory reset”. -
Page 20: Firmware Upgrade
The battery can be charged and discharged hundreds of web site at www.sena.com to check the latest software downloads. times, but it will eventually wear out. Recharge the battery only with Sena approved chargers designated for this device. Use of an unapproved charger may present a risk of fire, explosion, leakage, or other hazard. -
Page 21: Maintenance And Care
MAINTENANCE AND CARE DISPOSAL The product should be treated with care and the following suggestions The crossed-out wheel bin symbol on the product, will help you protect your warranty coverage. literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be 1. -
Page 22: Certification And Safety Approvals
This product is CE marked according to the provisions of the R&TTE reception, which can be determined by turning the equipment off and Directive (99/5/EC). Hereby, Sena declares that this product is in on, the user is encouraged to try to correct the interference by one or... -
Page 23: Industry Canada Statement
Bluetooth precautions and remain alert to the traffic, weather and road conditions SIG, Inc. and any use of such marks by Sena is under license. Other if you choose to use the product headset, including all derivative models trademarks and trade names are those of their respective owners. - Page 24 (including attorney’s fees) and holding including risk of negligent acts or omissions by others. Sena harmless for any bodily injuries, harm or death as well as losses 3. You confirm that you are physically capable to use the Device and...
-
Page 25: Two-Year Limited Warranty
Product or assume the risk of loss or damage in transit, to prepay by not returning the Device for a full refund (see refund option below). shipping charges to Sena, and to use the original shipping container or equivalent. -
Page 26: Return For Full Refund
IF YOU ARE UNWILLING TO ACCEPT AND AGREE TO THE ABOVE CONDITIONS, YOU MAY RETURN THIS DEVICE TO SENA FOR A FULL Sena informs that using this device in public traffic may not be REFUND, PROVIDED THAT YOU DO SO NO LATER THAN 14 BUSINESS authorized by the law. - Page 27 1.0.1 www.sena.com User's Guide for Firmware v1.0...
Need help?
Do you have a question about the BS and is the answer not in the manual?
Questions and answers