Thank you for choosing the Sena SMH3, Bluetooth Headset and Intercom players for Scooters and Motorcycles. With the SMH3, you can call handsfree on Bluetooth stereo headset for Bluetooth GPS navigations your Bluetooth mobile phone, listen to stereo music or GPS navigation...
PACKAGE CONTENTS 2. PACKAGE CONTENTS Status LED Pin-hole DC Power Charging & (-) Button Reset Button Firmware Upgrade Port (Intercom Button) USB Power & Data Cable Speakers (+) Button (Phone Button) Microphone Velcro Pads Microphone Sponges for Speakers SMH3 Headset...
SMH3 GETTING STARTED 3. GETTING STARTED Installing the SMH3 on Your Helmet 1. Place the speaker-microphone unit in the helmet along with the velcro pads, centered to your ear, in the ear pockets of the helmet. Locate the boom microphone as closely as possible to your mouth when wearing the helmet.
“Goodbye” and descending beeps. Charging the SMH3 You can charge the SMH3 by connecting the supplied USB power & data cable into a computer USB port or USB wall charger. You can use any standard micro-USB cable to charge the SMH3. The LED turns red while charging, and turns blue when the headset is fully charged.
Note: 4 flashes High, 70~100% 1. The USB power & data cable is also used for firmware upgrade of the SMH3. 3 flashes Medium, 30~70% 2. The USB wall charger is not included in the package. Any 3rd party USB...
Bluetooth MP3 music. So you can always maintain the preferred When the SMH3 is not working properly or is in faulty status for any optimum volume level for each audio source.
SMH3 Sena SMH3 OPERATION QUICK REFERENCE Operations Function 4. OPERATION QUICK REFERENCE 5 sec. Sena SMH3 v1.0 Operations Function 1 sec. 1 sec. Power Bluetooth Sena SMH3 Select On/Off Sena SMH3 Pairing (Phone, MP3, 1 press 1 press GPS) Volume Sena SMH3 v1.0...
Page 10
SMH3 Operations Operations Function Function 1 press 1 sec. Answer 2 sec. 2 sec. Music 2 sec. 3 sec. Mobile Phone Voice Command 3 sec. 2 sec. Reject...
1. You can pair the first mobile phone to the SMH3 by following the simple procedures in “Mobile Phone Pairing”. 1 Turn on the SMH3 and press and hold the (+) Button for 5 seconds 2. To pair the second mobile phone, press and hold the (-) Button for 5...
1. If the Bluetooth stereo device is integrated with the mobile phone such as smartphones, you don’t need to pair the SMH3 with it separately. When the SMH3 is paired with the mobile phone, it is also paired as a stereo music device.
Page 13
Pairing Pairing 3. Search for Bluetooth devices on the GPS navigation screen. Select the Sena SMH3 in the list of the devices detected on the GPS. A2DP 4. Enter 0000 for the PIN. 5. The GPS confirms that pairing has completed and the SMH3 is ready to use.
Page 14
Bluetooth stereo music source, you can pair the GPS to the SMH3 by following the simple procedures in “Mobile Phone Pairing”. When you do this, the SMH3 thinks the GPS is a mobile phone. But the SMH3 can directly pair an additional mobile phone.
You can listen to stereo music by Bluetooth wireless stereo. The Bluetooth 4. To reject a call, press and hold the (-) Button for 2 seconds until you audio device must be paired with the SMH3 by following the “Bluetooth hear a beep while the phone is ringing.
1. When you have an incoming mobile phone call during an intercom 1. Turn on the two SMH3 headsets (A and B) that you would like to pair conversation, you will hear a ring tone. You can choose whether to 1) with each other.
4 high tone beeps alerting them that there is an incoming intercom call. pressing the (-) Button. 4. If any button is not pressed within 10 seconds, the SMH3 will exit the Intercom Reconnection configuration and goes back to standby.
VOX feature does not work if you are connected to intercom. To delete all Bluetooth pairing information of the SMH3, press and hold This is enabled from the factory but you can disable this. If this mode is the (+) Button until you hear a voice prompt, “Delete all pairings”, and...
Execute “Factory reset” Execute To restore factory default settings on the SMH3, press and hold the (+) Button until you hear a voice prompt, “Factory reset”. Press the (-) Execute Button to confirm. The SMH3 powers off with a voice prompt, “Headset reset, goodbye”.
The battery can be charged and discharged hundreds of software downloads. times, but it will eventually wear out. Recharge the battery only with Sena approved chargers designated for this device. Use of an unapproved charger may present a risk of fire, explosion, leakage, or other hazard.
SMH3 MAINTENANCE AND CARE DISPOSAL The product should be treated with care and the following suggestions The crossed-out wheel bin symbol on the product, will help you protect your warranty coverage. literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be 1.
This product is CE marked according to the provisions of the R&TTE reception, which can be determined by turning the equipment off and Directive (99/5/EC). Hereby, Sena declares that this product is in on, the user is encouraged to try to correct the interference by one or...
Bluetooth precautions and remain alert to the traffic, weather and road conditions SIG, Inc. and any use of such marks by Sena is under license. Other if you choose to use the product headset, including all derivative models trademarks and trade names are those of their respective owners.
Page 24
(including attorney’s fees) and holding including risk of negligent acts or omissions by others. Sena harmless for any bodily injuries, harm or death as well as losses 3. You confirm that you are physically capable to use the Device and...
Product or assume the risk of loss or damage in transit, to prepay by not returning the Device for a full refund (see refund option below). shipping charges to Sena, and to use the original shipping container or equivalent.
IF YOU ARE UNWILLING TO ACCEPT AND AGREE TO THE ABOVE CONDITIONS, YOU MAY RETURN THIS DEVICE TO SENA FOR A FULL Sena informs that using this device in public traffic may not be REFUND, PROVIDED THAT YOU DO SO NO LATER THAN 14 BUSINESS authorized by the law.
Page 27
1.0.0 www.SenaBluetooth.com User's Guide for Firmware v1.0...