Vsc Binding - HP ProCurve MSM317 Installation And Getting Started Manual

Configuration
Configuring the switch ports
Example 2: When binding to a non-access-controlled VSC
In this scenario, Port 2 is bound to a non-access-controlled VSC named Guest. This VSC is
configured to provide 802.1X authentication with the login credentials for user A validated
against the local user list stored on the MSM7xx Controller.
A local account is created for user A with an egress VLAN ID of 30. Once user A is
authenticated, this VLAN overrides the port-assigned VLAN, resulting in the user's traffic
being sent on VLAN 30.

VSC binding

Use this option to bind a port to a VSC. This applies settings from the VSC to the port. The
type of settings that are applied depend on the type of VSC: access-controlled or non-access-
controlled.
3-19