HP ProCurve MSM317 Installation And Getting Started Manual page 53

Configuration
Configuring the switch ports
User A
Wired guests, as illustrated by user A, connect to Port 2, which is bound to the VSC named
Guest. Authentication occurs using the local user accounts on the MSM7xx Controller. Once
authenticated, user A gains access to resources on the private network according to the
configuration of the public access interface feature on the MSM7xx Controller. Since the
Guest VSC is not the default VSC, a VLAN definition must be assigned to the port to ensure
that user traffic is properly routed from the MSM317 to the VSC on the MSM7xx Controller.
Key configuration settings for Port 2 are as follows:
Configuration of the VLAN on the MSM7xx Controller is as follows:
Key configuration settings for the VSC are as follows:
3-25