HP ProCurve MSM317 Installation And Getting Started Manual page 54

Configuration
Configuring the switch ports
User B
Wireless guests, illustrated by user B, connect to the MSM317 radio using the SSID Guest.
This SSID is defined in the VSC named Guest which is bound to the MSM317 using
Controlled APs > [AP group] >> VSC bindings on the MSM7xx Controller. (There is no
option on the MSM317 to bind a VSC to the wireless port.) Authentication occurs using the
local user accounts on the MSM7xx Controller. Once authenticated, the user gains access to
resources on the private network according to the configuration of the MSM7xx Controller
public access interface feature. The SSID assigned to the VSC is used to route traffic from the
MSM317 to the VSC on the MSM7xx Controller, therefore no VLAN is required. For more
information on binding VSCs for wireless users, see the MSM7xx Controllers Management
and Configuration Guide.
The configuration settings for the VSC are identical to those done in the previous section
(Wired guests), except for the wireless-related settings which are shown below:
3-26