Maintenance And Service; Hako System Maintenance - HAKO 1500 E Instruction Manual

Maintenance and Service

5 Maintenance and
Service
General information
It is essential to pay attention
to the information in Chapter
"Safety Information" before
completing any service or
maintenance work!
By adhering to the maintenance work
recommended by us, you can be sure
that the vehicle is always ready to be
put into operation.
Maintenance and repair work neces-
sary on a daily and weekly basis can be
carried out by a driver trained to com-
plete the work, all other Hako system
maintenance may only be completed by
personnel who are correspondingly
qualified and trained. In case of doubt,
please contact your nearest Hako ser-
vice center or authorized Hako dealer.
Failure to observe this annuls any rights
to claims under the terms of guarantee
in respect of resulting damage or con-
sequential damage.
Always specify the serial number, indi-
cated on the rating plate, when making
any inquiries and orders for spare parts,
refer to Section 1.7 - Rating plate.
40
5.1

Hako system maintenance

Hako system maintenance:
• ensures the Hako working vehicle is
always ready for operation (preven-
tive maintenance),
• minimizes operating costs, mainte-
nance and repair costs,
• ensures the vehicle has a long ser-
vice life.
The Hako system maintenance de-
scribes the specific technical work nec-
essary for the individual modules and
defines the intervals for the mainte-
nance tasks. Individual parts which
must be changed during maintenance
tasks are defined and stipulated in
spare parts kits.
Hako system maintenance,
customer:
Work to be carried out by the customer
according to the service and mainte-
nance instructions in the operating
manual (daily and weekly). The driver/
operator receives detailed instruction
when the vehicle is delivered.
Hako system maintenance, one-off
(After 50 operating hours)
Must be completed by a skilled techni-
cian in an authorized Hako service cen-
ter according to the vehicle-specific
system maintenance with a spare parts
kit.
Hako system maintenance I:
(Every 250 operating hours)
Must be completed by a skilled techni-
cian in an authorized Hako service cen-
ter according to the vehicle-specific
system maintenance with a spare parts
kit.
Hako system maintenance II:
(Every 500 operating hours)
Must be completed by a skilled techni-
cian in an authorized Hako service cen-
ter according to the vehicle-specific
system maintenance with a spare parts
kit.
Hako system maintenance III/S:
(Every 1000 operating hours, safety
check)
Must be completed by a skilled techni-
cian in an authorized Hako service cen-
ter according to the vehicle-specific
system maintenance with a spare parts
kit. All the legally prescribed safety-rel-
evant tests must be completed in accor-
dance with UVV-BGV-TÜV-VDE.