Maintenance And Service; Hako System Maintenance - HAKO Hakomatic B115R Operating Manual

Maintenance and Service

5 Maintenance and
Service
General information
It is essential to pay attention
to the information in Chapter
"Safety Information" before
completing any service or
maintenance work!
By adhering to the maintenance work
recommended by us, you can be sure
that the vehicle is always ready to be
put into operation.
Maintenance and repair work neces-
sary on a daily and weekly basis can be
carried out by a driver trained to com-
plete the work, all other Hako system
maintenance may only be completed by
personnel who are correspondingly
qualified and trained. Please contact
your nearest Hako service center or
authorized Hako dealer. Failure to ob-
serve this annuls any rights to claims
under the terms of guarantee in respect
of resulting damage or consequential
damage.
Always specify the serial number in the
case of inquiries and spare parts or-
ders, refer to Section 1.7 - Rating plate.
5.1

Hako system maintenance

The Hako system maintenance:
• ensures that the Hako vehicle is al-
ways ready for operation (preventive
maintenance),
• minimizes operating costs, mainte-
nance and repair costs,
• ensures the vehicle has a long ser-
vice life.
Hako system maintenance provides in-
dividual modules explaining the special
technical work to be carried out and
prescribes the intervals at which the
work should be performed. Parts to be
replaced for the individual maintenance
tasks are defined and provided in spare
parts kits.
Hako system maintenance K:
Work to be carried out by the customer
according to the service and mainte-
nance instructions in the operating
manual (daily and weekly). The driv-
er/operator receives proper instruction
when the vehicle is delivered.
Hako system maintenance I:
(every 250 operating hours)
Completed by technical experts from an
authorized Hako service center in ac-
cordance with the specific vehicle sys-
tem maintenance using spare parts kits.
Hako system maintenance II:
(every 500 operating hours)
Completed by technical experts from an
authorized Hako service center in ac-
cordance with the specific vehicle sys-
tem maintenance using spare parts kits.
Hako system maintenance III/S:
(every 1000 operating hours, safety
check)
Completed by technical experts from
an authorized Hako service center in
accordance with the specific vehicle
system maintenance using spare parts
kits. Completion of all legally pre-
scribed, safety-related tests in accor-
dance with UVV, BGV, TÜV and VDE
requirements.
49