Installing Blades - Makita 2030N Instruction Manual

0
Lock the drum
a t
the position shown in Fig. 17 and loosen the hex bolts with the
When removina the blade from the Auto-Planer, lock the drum
a t
the position shown
socket wrench. Remove the hex bolts and the drum cover.
0
Insert the blade between the drum and
the blade holder. Set the blade so that
it
will protrude by 2 mm (5/64") to
3 mm (1/8") from the drum. The holes
of the blade should be aligned with the
holes of the drum.
I
in Fig. 18 and push the blade
the screwdriver.
Blade Blade holder
2 m m
-
3mm
out with
Fig. 19
.When removing the blade from the
Jointer, release the drum lock and turn
the knob to the position a t which the
blade can be pushed out with the screw-
driver.
Fig. 20
2. Installing blades
0
Lock the drum a t the position shown in Fig. 18.
14