Download Print this page

Makita 2012NB Instruction Manual

Hide thumbs


IMPORTANT: Read Before Using.



  Related Manuals for Makita 2012NB

  Summary of Contents for Makita 2012NB

  • Page 1 INSTRUCTION MANUAL Planer 2012NB 014060 DOUBLE INSULATION IMPORTANT: Read Before Using.
  • Page 2: Specifications

    ENGLISH (Original instructions) SPECIFICATIONS Model 2012NB Cutting width 304 mm 3.0 mm of stock width less than 150 mm Max. cutting depth 1.5 mm of stock width from 150 mm to 240 mm 1.0 mm of stock width from 240 mm to 304 mm Feed rate (min 8.5 m...
  • Page 3 Use safety glasses and hearing protection. 21. Warning. Also use face or dust mask if the cutting operation The use of any accessory or attachment, other is dusty. than those recommended in this instruction 10. Connect dust extraction equipment. manual or the catalog, may present a risk of If devices are provided for the connection of dust personal injury.
  • Page 4: Installation

    WARNING: FUNCTIONAL DESCRIPTION DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence CAUTION: to safety rules for the subject product. Always be sure that the tool is switched off and MISUSE or failure to follow the safety rules stated in •...
  • Page 5: Adjusting Depth Of Cut

    graduations on its right side and metric graduations on its First, plane the workpiece at the predetermined left side. depth of cut. Measure the thickness of the planed piece to know how much more stock you need to Adjusting depth of cut remove.
  • Page 6 Press the lock plate and turn the pulley 180° to lock the drum. Remove the other blade as CAUTION: described above. Use only Makita socket wrench provided to tighten • the blade installation bolts. The use of any other 1. Blade installation...
  • Page 7 1. Magnetic holder 1. Screw 2. Set plate 2. Set plate 3. Blade 3. Blade 4. Blade gauge 1mm (3/64”) 003718 004470 Grip the magnetic holder and slip the heel of the set plate Slip the heel of the set plate into the groove in the drum. into the groove in the drum.
  • Page 8: Operation

    Hood set (optional accessory) 1. Hex bolt 2. Hex nut 1. Hood 3. Flat washer 2. Hood holder 4. Hex bolt 003720 NOTE: 003722 Insert the hex bolts through the holes from the When you wish to maintain clean operations through •...
  • Page 9: Replacing Carbon Brushes

    When cutting a long or heavy workpiece, lift up its end 1. Hex wrench slightly at the start and the end of the cut to avoid gouging or snipping at the extreme ends of the workpiece. The use of the tool top enables quick, effortless return of the workpiece to the infeed table side.
  • Page 10: Optional Accessories

    If you need any assistance for more details regarding 003730 these accessories, ask your local Makita Service Center. Oil the chain (after removing the side cover R), the four Magnetic holder • columns and the screws for elevating the main frame.
  • Page 12 Makita Corporation Anjo, Aichi, Japan 884278D998...