Fusion Network Connection; Fusion Nmea 2000 Connection - Raymarine gs series Installation Instructions Manual

4.26 Fusion network connection

Fusion 700 and 750 Series marine entertainment
systems can be connected directly to the display's
network connection or can be connected to the
SeaTalk hs network, via a Raymarine
switch. The Fusion entertainment system can be
controlled by any MFD connected to the same
network.
Multiple Fusion units can be connected to the same
network.
2
1. MFD
2. Network connection to MFD (RayNet to RJ45
SeaTalk hs adaptor cable)
3. Fusion ethernet connection
4. Fusion unit
Note: The MFD should always be powered from a
separate breaker and be powered on before any
other connected devices.
For further installation information, refer to the
installation instructions supplied with the unit.
52
® network
1
3 4

4.27 Fusion NMEA 2000 connection

Compatible Fusion NMEA 2000 marine
entertainment systems can be connected to the
SeaTalk ng® backbone. The Fusion entertainment
system can be controlled by any compatible MFD
connected to the same backbone.
Multiple Fusion units can be connected to the same
backbone.
1
D12741-2
1. MFD
2. NMEA 2000 Fusion unit

3. Fusion NMEA 2000 connection

4. SeaTalk ng®
(A06045)
5. SeaTalk ng®
Note: The MFD should always be powered from a
separate breaker and be powered on before any
other connected devices.
For further installation information, refer to the
installation instructions supplied with the unit.
Compatible Fusion units
The table below details the Fusion entertainment
systems that are compatible with Raymarine
LightHouse TM powered MFDs.
Fusion unit
650 Series
700 Series
750 Series
RA205 Series
to DeviceNet female adaptor cable
backbone
NMEA 2000 SeaTalk
connection connection
gS Series installation instructions
D13325-1
®
hs