Fusion Network Connection - Raymarine eS Series Installation Instructions Manual

Raymarine recommends the use of a BNC
terminated RG59 75ohm (or better) coaxial cable.
50

4.21 Fusion network connection

Fusion 700 and 750 Series marine entertainment
systems can be connected directly to the display's
network connection or can be connected to the
SeaTalk hs network, via a Raymarine
switch. The Fusion entertainment system can be
controlled by any MFD connected to the same
network.
Multiple Fusion units can be connected to the same
network.
2
1. MFD
2. Network connection to MFD (RayNet to RJ45
SeaTalk hs adaptor cable)
3. Fusion ethernet connection
4. Fusion unit
Note: The MFD should always be powered from a
separate breaker and be powered on before any
other connected devices.
For further installation information, refer to the
installation instructions supplied with the unit.
® network
1
3 4
eS Series installation instructions
D12741-2