Assembly And Disassembly - Sunrise Medical Sterling Midi Owner's Manual

Assembly and disassembly

Tiller
First ensure that the tiller
adjustment lever is fully tightened
(Fig. 1).
Connecting the front and rear
(i) Position the front of the drive
assembly directly behind the
rear of the baseboard as in
(Fig. 2).
(ii) Take the tiller handlebar in one
hand and the dedock cable, at
the rear of the baseboard, in the
other hand.
(iii)Slide the baseboard docking
arms onto the guide rails of the
drive assembly (Fig. 2a).
(iv)Push the baseboard back
sharply so that the docking pins
on the docking arms drop into
the locked position on the guide
rails. Once they have locked into
position you will hear a 'click'.
Tiller adjustment lever
Fig. 1
Fig. 2
Docking
arms
Dedock
cable
Fig. 2a
7
Guide
rails
Issue 1