User tips
Transportation
Your Scoota can be disassembled
quickly and simply for
transportation by car - see section
5. Alternatively, if you wish to use a
ramp to load your Scoota into the
back of a car then:
(i) Remove the seat (see page 10)
(ii) Lower the tiller, using the
adjustment lever, to its lowest
setting (see page 12).
(iii)Select the minimum speed
setting, and standing alongside
the Scoota drive it forward up
the ramp. Switch the Scoota off,
release the freewheel knob at
the rear of the Scoota and push
the Scoota fully into the car (Fig.30).
Note: Remember to re-engage
the drive assembly by turning
the freewheel knob anti
clockwise, to stop the Scoota
moving in transit. Always secure
your Scoota before
transportation.
Tiller in lowest position
Fig. 30
23
Issue 1