Error Code List - Sanyo SFX-110 Service Manual

5-5. Error code list
Error code is printed on the Activity ReDort and Transmission Report.
El O, El 2 The other party does not respond
CODE CONTENTS I CLASSIFICATION
SYMPTOM and NOTES
10 T1 time over T, R Even 35 +/– 5 seconds passed after starting
communication, no signal received from the
I
1
12 No response on redial T, P-T
1
No response from the party even when redialing I
of the timer transmission is carried out.
E16
CODE CONTENTS
I CLASSIFICATION SYMPTOM and NOTES
1
I
16 I Mechanical error
I
I
See page 21
I
E20 - E27 Own machine troubles
CODE CONTENTS j CLASSIFICATION
SYMPTOM and NOTES
20 Stop switch was pressed
I
21 Original jam
ALL
Transmission is interrupted caused by
pressing the [STOP] key.
T
I
I 23 I No recording paper
I
R
I
I
24 Recording paper jam R
25 Cutter locks R
Paper remains in the cutter position.
26
I
30 min. time over for continuous ALL
ooeration
27
No Timer Tx. T No original setting/ Timer cancelled
E30 - E33 Image deficiency
CODE CONTENTS
CLASSIFICATION
30 Exceed the error line limitation R
I 31 I RTN transmission
IR
I 32 I RTN reception
IT
I 33 I Over 5 seconds per line
I
R
E40, E41 Error in the other party
SYMPTOM and NOTES
These errors may be caused by the S/N or
deflection on the line.
Check the disturbance and verify the
incoming signal level using the level meter.
Test the setting of the appropriate equalizer
to compensate the line loss.
CODE CONTENTS I CLASSIFICATION I
40 No recording paper in the other
T
party
41
I
No polling original in the other
I
P-R
~artv
I
SYMPTOM and NOTES
25