Installing The Recording Paper - Sanyo SFX-110 Service Manual

(4) Installing the recording paper
How to install the recording paper roll:
3. Press the [OPEN] button to open
1. Open the original document tray.
the recording paper cover.
\
\
4. Place the supplied roll, in the direction
in the diagram, in the paper holder.
Correct Wrong
02!3
2. Open the operation panel.
shown
5. Remove any slack from the roll and insert
6. Close the recording paper cover by pressing
the end of roll into the recording paper exit
both left and right corners of the far end of –
until it extends about 10 cm.
the cover firmly. The SFX-1 10/21 O cuts the
extra recording paper automatically.
" Use only the recording paper specified for the SFX-1 10/21 O.
High-grade thermal paper
TheSFX-l 10/21 O is compatible with high-grade thermal paper, a new type of fax recording paper that has
plain-paper quality. Unlike regular thermal paper, the high-grade thermal paper does not fade with time, can be
written on with pencil and can be erased.
SANYO Type: 3RE21 82800450,216 mm (8.5") wide and 25 m (82') long.
Thermal paper
SANYO Type: R-4079448-1, 216 mm (8.5") wide and 30 m (98') long
To purchase, contact your dealer.
_,
5