Sanyo SFX-110 Service Manual page 9

Before programming the dialing memory or your station name, you need to know to enter names using number
keys and one-touch keys.
—
The number keys [2], [4], [5], [6], [8] and [0], the one-touch keys [5], [6] and [8] are used for name programming.
The characters are grouped as
shown
below:
Group 1 Group 2
Group 3
ABCDE abcde 12345
FGHIJ fghij 67890
KLMNO klmno
. .
.! .,"
PQRST pqrst +-l&*
UVWXY Uvwxy
# '"()
z z
<>!
?=
ONE TOUCH DIAL
'o ')::: a (
(o 0]
45
REDIAUP
0(
4
(o 0") o
(o o)
DELETE
o a(
~ABCDE
Cursor 1 CurJor 2
The LCD display is divided into 2 sections: The registration area (left) shows the name being entered, and in the
selection area (right), a set of 5 characters appears as you scroll up or down the display. Each area has a
separate cursor.
Selecting a character
L
1. Use number key [5] to select the desired character group.
The first line of the selected group appears each time the number key [5] is pressed.
2. Use number keys [2] or [8] to scroll up or down the display.
3. Use number keys [4] or [6] to move the cursor 2 to select a character.
4. Press [}] (one-touch key 6) to enter the selected character into registration area. The cursor 1 moves to the
right.
5. Repeat steps 1-4 to finish writing a name.
To leave a blank space in the name, press number key [0].
To backspace the cursor 1, press [ < ] (one-touch key 5).
To advance the cursor 1 to the right, press [ } ] (one-touch key 6).
To erase a character, move the cursor 1 over the character to be erased, and then
press the [DELETE] (one-touch key 8).
L
8