Error Code List - Sanyo SFX-33 Service Manual

5-4. Error code list
Error code is printed on the Activity Report and Transmission Report.
E1O, El 2 The other party does not respond
CODE
10
12
CONTENTS CLASSIFICATION
T1 time over T, R
No response on redial T, P-T
SYMPTOM and NOTES
Even 35 +/– 5 seconds passed after starting
communication, no signal received from the
party.
No response from the party even when redialing
of the timer transmission is carried out.
E20 - E27 Own machine troubles
CODE CONTENTS
I CLASSIFICATION SYMPTOM and NOTES
I 20 I Stop switch was pressed I ALL
21 Original jam T
I 23 I No recording paper
24
Recording paper jam
R
25
Cutter locks R
E30 - E33 Image deficiency
CODE CONTENTS CLASSIFICATION
30 Exceed the error line limitation
R
I I
t
31 RTN transmission R
I 32 I RTN reception
IT
L
I 33 I over5
seconds per line
I
R
E40, E41 Error in the other party
Transmission is interrupted caused by
pressing the [STOP] key.
I
Paper remains in the cutter position.
SYMPTOM and NOTES
These errors may be caused by the S/N or
deflection on the line.
Check the disturbance and verify the
incoming signal level using the level meter.
Test the setting of the appropriate equalizer
to compensate the line loss.
CONTENTS I CLASSIFICATION SYMPTOM and NOTES
40 No recording paper in the other
T
party
41 No polling original in the other
P-R
party
'.-
26