Timer Operation; Fonctionnement Par Minuterie; Zeitbetrieb; Funzionamento Con Timer - Toshiba RAV-SM562KRT-E Owner's Manual

TIMER OPERATION

A type of timer operation can be selected from the following three types.
OFF timer : The operation stops when the time of timer has reached the set time.
Repeat OFF timer : Every time, the operation stops after the set time has passed.
ON timer : The operation starts when the time of timer has reached the set time.
Timer operation
1 1 Push TIMER SET button. 1 1 1
• The timer display (type) changes for every push
of the button.
• SET DATA and
2 2 Push 2
2 2
TIMER SET
to select "SET TIME".
Every pushing
in the unit of 0.5 hr (30 minutes).
For the setup time above
The maximum setup time is
On the remote controller, the setup time is displayed with numerals for 0.5 hr to 23.5 hr (*1), and time over 24 hr
(*2) is displayed by No. of days and time.
Every pushing
(From 0.5 hr to 23.5 hr) or in the unit of 1 hr (From 24 hr to 168 hr).
Display example of remote controller
• Case of 23.5 hr (*1)
SETTING
3 3
3 Push SET button. 3 3
• SET DATA display disappears and
(When ON timer is activated, time is displayed, and after time of the timer has been up, displays other than ON
disappear.)
Cancel of timer operation
4 4
4 Push CL button. 4 4
• TIMER display disappears.
NOTICE
• When the operation stops after the timer reached the preset time, the Repeat OFF timer resumes the
operation by pushing
time.
TEMP.
1
FILTER
RESET TEST
display flashes.
button, the setup time increases
(24 hr), time increases in the unit of 1 hr.
(168 hr).
button, the setup time is decreased in the unit of 0.5 hr (30 minutes)
• Case of 34 hr (*2)
ON / OFF
button and stops the operation after the time of the timer has reached the set
ON / OFF
TIMER SET FAN
TIME SWING/FIX
SET CL UNIT
3 4
SETTING
display goes on.
20
MODE
VENT
2
EN