COOLING/HEATING/FAN ONLY OPERATION
Start
1 START/STOP button
1
1
1
1
Push this button to start the air conditioner.
2
2
2
2 Mode select button (MODE)
2
Select Cool
, Heat
3
3 Temperature button (TEMP.)
3
3
3
Set the desired temperature.
When the air conditioner is in FAN ONLY operation, the temperature
display is not indicated.
4
4 Fan speed button (FAN)
4
4
4
Select one of "AUTO" LOW
+
MED
, HIGH
•
The
lamp (green) on the display panel of the indoor unit
goes on. And operation starts after approximately 3 minutes.
(If you select FAN ONLY mode, the unit will start immediately.)
•
The
: Fan only mode does not control temperature.
Therefore, perform only steps 1, 2 and 4 to select this mode.
Stop
START/STOP button
Push this button again to stop the air conditioner.
DRY OPERATION
Start
1 START/STOP button
1
1
1
1
Push this button to start the air conditioner.
2 Mode select button (MODE)
2
2
2
2
Select DRY
.
3
3
3 Temperature button (TEMP.)
3
3
Set the desired temperature.
•
The fan speed display indicates AUTO.
•
The
lamp (green) on the display panel of the indoor unit
lights, and operation starts after approximately 3 minutes.
Stop
START/STOP button
Push this button again to stop the air conditioner.
, or Fan only
.
, LOW
+
, MED
.
1
,
1
10
4
3
2
3
2
EN