Switching On The Robot Vacuum Cleaner; Setting The Clock Time - Philips FC9910 User Manual

switching on the robot vacuum cleaner

1 Set the on/off switch on the bottom of the robot vacuum cleaner to
ON.
2 Press the power button on the robot vacuum cleaner.
, The robot vacuum cleaner boots for approx. 1 minute. The booting
indication is shown on the display.
, The robot vacuum cleaner enters operational mode: the display and
the power-on light go on.
Note: If you do not press any of the buttons on the robot vacuum cleaner
or on the remote control for 5 minutes when the robot vacuum cleaner is
in operational mode but is not cleaning in any of the cleaning modes, the
appliance automatically switches to standby mode.

setting the clock time

The clock time has to be set with the remote control. The robot vacuum
cleaner uses the 12-hour clock. When AM lights up on the display, the time
shown is a time between midnight and midday. When PM lights up, the
time shown is a time between midday and midnight.
English
17