Philips FC9910 User Manual page 20

English
20
2
1
2
1 3
4 If you want to pause for a moment, press the start/pause button on
the robot vacuum cleaner or on the remote control.
The start/pause indication on the display lights up continuously.
,
5 Press the start/pause button on the robot vacuum cleaner or on the
remote control to resume cleaning.
6 Press the power button on the robot vacuum cleaner or on the
remote control to stop cleaning. The robot vacuum cleaner stops
cleaning but stays in operational mode.
7 Press the power button on the robot vacuum cleaner or the remote
control again to make the robot vacuum cleaner go into standby
mode.
The display goes off.
,
using the direction selector, the base button or the turbo
button on the remote control
1 Press the direction selector to direct the robot vacuum cleaner to a
particular area.
Press the direction selector at the arrow pointing in the direction you wish
the robot vacuum cleaner to move.
Note: The robot vacuum cleaner cannot move backwards. Therefore the down
3
arrow does not work.
- When you press the direction selector when the robot vacuum cleaner
is in operational mode but not cleaning, the robot vacuum cleaner
switches to manual mode and moves in the desired direction without
cleaning.
- When you press the direction selector when the robot vacuum cleaner
is cleaning in one of the cleaning modes, it switches to manual mode
and moves in the desired direction while cleaning.