Cleaning Modes - Philips FC9910 User Manual

2
1
2 Press the base button to make the robot vacuum cleaner return to
the base station.
The text 'bASE' appears on the display.
,
The robot vacuum cleaner moves to the base station and docks itself
,
on the base station.
, The charging light on the base station starts to flash green and
the charging indication on the display of the robot vacuum cleaner
flashes.
3 Press the turbo button to make the robot vacuum cleaner clean
more thoroughly.
The turbo indication lights up on the display.
,
- Press the turbo button again to return to the robot vacuum cleaner's
normal level of thoroughness.
Note: You cannot use the turbo button to switch off the turbo function when
the robot vacuum cleaner is cleaning in carpet cleaning mode. In the carpet
cleaning mode, the turbo function is on by default.

Cleaning modes

The robot vacuum cleaner has four cleaning modes. Press the mode button
on the robot vacuum cleaner or on the remote control one or more
times to select a cleaning mode. Then press the start/pause button to start
cleaning in the selected mode.
auto cleaning mode
- Use the auto cleaning mode to clean a whole room or multiple rooms
connected by a hallway. The auto cleaning mode is the robot vacuum
cleaner's default cleaning mode. If you press the start/pause button
to start cleaning and do not select another cleaning mode, this is the
mode the robot vacuum cleaner uses.
- Press the mode button to select the auto cleaning mode, if necessary
(1). The auto cleaning indication lights up on the display. Press the start/
pause button (2) to make the robot vacuum cleaner start cleaning
in auto cleaning mode from the base station. The robot vacuum
cleaner leaves its base station, turns half a circle and starts moving
in parallel straight lines through the room to clean it. When it has
finished cleaning the room, the text 'bASE' appears on the display and
the robot vacuum cleaner returns to the base station.
Note: If the battery of the robot vacuum cleaner runs low during cleaning, the
robot vacuum cleaner automatically returns to the base station to charge. After
English
21