Philips FC9910 User Manual page 22

English
22
2
1
1.5m
2
1
2
1
charging, the robot vacuum cleaner goes back to the place where it left off
cleaning and continues cleaning from that place.
- When the robot vacuum cleaner starts cleaning in auto cleaning mode
from another place in the room than the base station, it returns to its
starting point when it has finished cleaning. The text 'bASE' appears on
the display when the robot vacuum cleaner returns to its starting point.
spot cleaning mode
- Use the spot cleaning mode to clean a small area of about 1.5m x
1.5m. If you want to clean a small area in spot cleaning mode, move the
robot vacuum cleaner to the centre of the area you want to clean with
the direction selector.
- Press the mode button and select the spot cleaning mode (1). The spot
cleaning indication lights up on the display. Press the start/pause button
to start cleaning (2). The robot vacuum cleaner moves in parallel
straight lines to clean the small area. When it has finished cleaning the
area, the text 'bASE' appears on the display and the robot vacuum
cleaner returns to its starting point.
Climb cleaning mode
- Use the climb cleaning mode to clean floors with thicker rugs and with
objects the robot vacuum cleaner cannot climb over in auto cleaning
mode. In climb cleaning mode the robot vacuum cleaner is able to
clean most low-pile rugs and can cross objects with a height up to
15mm.
- To use the climb cleaning mode, press the mode button and select the
climb cleaning mode (1). The climb cleaning indication lights up on the
display. Press the start/pause button (2) to make the robot vacuum
cleaner start cleaning in climb cleaning mode from the base station. It
leaves its base station, turns half a circle and starts cleaning, moving in
parallel straight lines through the room. When it has finished cleaning
the room, the text 'bASE' appears on the display and the robot vacuum
cleaner returns to the base station.
Note: If the battery of the robot vacuum cleaner runs low during cleaning, the
robot vacuum cleaner automatically returns to the base station to charge. After
charging, the robot vacuum cleaner goes back to the place where it left off
cleaning and continues cleaning from that place.
Note: If you did not start cleaning from the base station, the robot vacuum
cleaner will return to its starting point when it has finished cleaning.