Installing And Removing Smartcard Reader; Installing The Smartcard Reader - Fujitsu FUTRO S900 Operating Manual

System expansions

Installing and removing SmartCard reader

If you are also installing the optional loudspeaker, install the SmartCard
reader before the loudspeaker.

Installing the SmartCard reader

SmartCardreader
If not already installed, you can fit a SmartCard reader.
► Open the casing (see
► If a PCI or PCIe board is installed, remove the cross piece and PCI or PCIe
board (see "Removing the board", Page 38 -
► Place the carrier for the SmartCard reader in the casing (1).
► Fasten the carrier with the screw (2).
Fujitsu Technology Solutions
"Opening the casing", Page 20 - English).
English).
2
English - 23
1
65