Installing And Removing A Power Over Ethernet Module (Optional); Installing The Power Over Ethernet Module - Fujitsu FUTRO S900 Operating Manual

System expansions
Installing and removing a Power over Ethernet
module (optional)
You can install an additional Power over Ethernet module in your device.
Alternatively, you can install a WLAN module in the same slot. You
can only install one of the modules.
If you are supplying the system with power via the PoE module, ensure that
no additional power supply (mains adapter) is connected.
Not all expansion levels support this module: Please observe the information provided
by the manufacturer when installing the Power over Ethernet module.

Installing the Power over Ethernet module

Power overEthernetmodule,
► Open the casing (see
► If a PCI or PCIe board is installed, remove the cross piece and PCI or PCIe
board (see "Removing the board", Page 38 -
► Break the cover (1) out of the casing.
Fujitsu Technology Solutions
"Opening the casing", Page 20 -
1
English).
English).
2
English - 33
75