Model 424 - Sub-Zero 424 Installation Manual

Models 424 and 424FS Installation
Anti-Tip Bracket Installation
To prevent the unit from tipping forward and provide a
stable installation, the unit must be secured in place
with the anti-tip bracket.
An anti-tip bracket and hardware is provided with the wine
storage unit. The anti-tip bracket must be installed on a
solid base to prevent tipover in case several loaded wine
shelves are extended at the same time.

MODEL 424

The anti-tip bracket should be attached to the wall behind
the unit with the bracket flange located immediately above
the top of the unit. Refer to the illustration below.
A smaller metal 'countertop' bracket is also provided with
the model 424, for installations that need to be modified to
provide a secure surface for attaching the bracket. This
bracket will secure the front of the unit to the underside of
the countertop, above the unit. Refer to the illustration
below.
ANTI-TIP
BRACKET
1
/ "
4 (6)
Anti-tip bracket (424).
COUNTERTOP
BRACKET
Countertop bracket
MODEL 424FS
If you are installing the model 424FS in a space deeper
5
than 24 / " (625), the anti-tip bracket must be installed no
8
5
more than 24 / " (625) deep, so it engages the unit
8
properly. It is important that this measurement be made
from the front surface of the door, to the back of the anti-
tip bracket. Refer to the illustration below.
ANTI-TIP BRACKET
Anti-tip bracket (424FS).
8