Sub-Zero 424 Installation Manual page 5

Models 424 and 424FS Installation
Models 424 and 424FS Installation
The model 424FS wine storage unit is designed to be
attractive in a stand alone setting. Model 424 must be
built in. Refer to the previous page for overall dimensions
and door swing clearances for models 424 and 424FS.
Make sure that the finished rough opening where the
model 424 wine storage unit is to be installed is properly
prepared. Refer to the illustration. The floor under the unit
must be level with the surrounding finished floor.
IMPORTANT NOTE: To operate properly, the door must
open a minimum of 90°. Use a minimum 3" (76) filler in
corner installations to assure a 90° door opening. Allow
enough clearance in front of the unit for full door swing.
Do not load wine into the wine storage unit until the
installation is complete.
OPENING DIMENSIONS
24"
OPENING
24"
34
(610)
OPENING DEPTH
OPENING
HEIGHT
SIDE VIEW
MODEL 424
subzero.com
TOP VIEW
(610)
DEPTH
1
24"
/ "
(610)
2 (876)
OPENING WIDTH
FRONT VIEW
5