Vertical Tracking Force Adjustment (Vtf) - Pro-Ject Audio Systems SIGNATURE 10 Instructions For Use Manual

2. Vertical tracking force adjustment (VTF)

Place counterweight halfway along the counterweight support rod, being sure to have the locking screw
uppermost. With the power off, platter static, place the stylus pressure gauge onto the platter. To set the
required VTF place the tip of the stylus on the pressure gauge. Moving the counterweight towards the cartridge
will increase VTF, away will reduce VTF. In order to avoid damage of the cartridge, all cartridge movements
must be done in upper tonearm lift position. Repeat the measuring procedure until you achieved the correct
VTF.
12
© Pro-Ject Audio Systems · Pro-Ject SIGNATURE 10 · Revision 2015.07.07