Locking The Sewing Feet In Lifted Position; Sewing-Foot Pressure - Dürkopp Adler 868 Instruction Manual

6.13 Locking the sewing feet in lifted position

6.14 Sewing-foot pressure

1
–
Push the lever 1 downwards.
The sewing feet are locked in lifted position.
–
Push the lever 1 upward.
The sewing feet's position is unlocked.
Or
–
Lift the sewing feet pneumatically by pushing the knee switch.
The lever 1 then moves back into its initial position.
The required sewing-foot pressure is set with the setting wheel 2.
CAUTION !
The material must not "swim".
Do not set a higher pressure than is necessary.
–
To increase the sewing-foot pressure = turn the setting wheel 2
clockwise.
–
To decrease the sewing-foot pressure = turn the setting wheel 2
anti-clockwise.
1 2
27