Dürkopp Adler 868 Instruction Manual page 36

Sewing an intermediate bartack
Sewing over a cross seam.
(max. sewing foot stroke)
Sewing the 2 stitch length during
n d
the sewing process
(max. stitch length)
Increase the thread tension during
the sewing process
At the seam end
Remove the material
34
6
- Push down the stitch regulator lever 6.
The machine sews reverse stitches as long as the stitch
regulator lever is pressed down.
The rotation speed is determined through the pedal.
or
- Actuate key 5.
The max. sewing foot stroke is switched on.
The rotation speed is limited to 1600 min
Operation modes of the max. sewing foot stroke:
- Press briefly the knee switch to switch on the max.
sewing foot stroke.
- Actuate the knee switch again to switch off the max.
sewing foot stroke.
- Actuate key 2.
- Actuate key 1.
- Push the pedal all the way back and keep it pushed.
The final bartack will be sewn (if activated).
The thread will be trimmed.
The machine halts in the 2
The needles are lifted (Turning back).
The sewing feet are lifted.
- Remove the material.
5 4
.
- 1
position.
n d
3 2 1