Key Pad On The Machine Arm - Dürkopp Adler 868 Instruction Manual

6.17 Key pad on the machine arm

10
9
8
Key
1
2
3
4
5
7 6 5
Function
Supplementary thread tension
If the key is lit up:
Supplementary thread tension is switched on.
If the key is not lit up:
Supplementary thread tension is switched off.
2 stitch length
n d
If the key is lit up:
Higher stitch length (upper setting wheel) is active
If the key is not lit up:
Smaller stitch length (lower setting wheel) is active
Recalling or suppressing the initial or final bartack.
If the initial and final bartacks are generally switched
on, the next bartack is switched off by actuating the
key.
If the initial and final bartacks are generally switched
off, the next bartack is switched on by actuating the
key.
Setting the needle in high or low position.
The function of the key can be defined with the
parameter F-140.
1 = Needle high
2 = Needle high/low
3 = Single stitch
4 = Single stitch with 2
5 = Needle high, when outside position 2
The factory setting is 1 = Needle high.
Manually sewing backward.
The machine sews backward stitches as long as the
key is being pushed.
4 3 2 1
stitch length/ short stitch
n d
31