Macros; Recording Macros - Bosch AMAX panel 2100 User Manual

AMAX panel
8

Macros

Macros are used to assign complicated or often used button
sequences on the keypad to one button to simplify the
operation of the system. Therefore, a button sequences is
entered on the keypad, recorded and assigned to a macro. If
this macro is played, the recorded button sequence will be
executed.
It is possible to record up to three macros.
Notice!
Macros can only be used with a text keypad.
8.1

Recording Macros

How to Record a Macro
1.
2.
3.
4.
P
Example of Recording a Macro: Bypassing a Zone
This example shows how to assign macro 1 to bypassing zone 3.
This can be useful if you want to bypass zone 3 on a regular
basis.
In this example there are no bypassed zones yet.
1.
2.
Bosch Sicherheitsysteme GmbH
Enter your code + [8] and the number to which you want to
assign the macro. (Possible numbers are 1, 2 and 3.)
Press [#].
The system beeps twice.
Perform the operation you want to assign to the macro.
Press [#] for three seconds to end the recording of the
macro and to save it.
The system beeps three times. The macro is recorded and
the operation is executed.
Enter your code + [8] [1].
Press [#].
Macros | en
2015.05 | 04 | F.01U.295.569
29