Forced Arming - Bosch AMAX panel 2100 User Manual

AMAX panel
Arming all areas
4
P
Arming a single area (direct AWAY arm)
Arming a single area with a master keypad is only possible for
users with the permission level master 1 or master 2.
4
P
4
Please contact your installer to enable/disable this function.
Key Switch Arming
Users can use a key switch to arm the system.
4
P
Please contact your installer to enable/disable this function.
RADION RF Keyfob Arming
Users can use a RADION RF four button keyfob to arm the
system via the third button.
4
P
Please contact your installer to enable/disable this function.
3.1.3

Forced Arming

Arming the system when a zone is not sealed is known as forced
arming.
Bosch Sicherheitsysteme GmbH
Enter your code, press [0] [0] and [*].
The system beeps twice, the STAY indicator flashes slowly
and exit time starts. After the exit time, the STAY indicator
is lit and all areas are displayed as armed.
Enter your code, press the 2-digit area number of the area
to be armed and press [*].
The STAY indicator flashes slowly and exit time starts. After
the exit time, the STAY indicator is lit and the selected area
is displayed as armed.
Repeat if you want to arm multiple areas.
Activate the key switch.
The STAY indicator flashes slowly and exit time starts. After
exit time, the STAY indicator is lit.
Press the third button of the RADION RF four button
keyfob.
The STAY indicator flashes slowly and exit time starts. After
the exit time, the STAY indicator is lit.
Arming and Disarming the System | en
2015.05 | 04 | F.01U.295.569
19