Station List - Draytek VigorAP 900 User Manual

AckPolicy
After finishing this web page configuration, please click OK to save the settings.
3 . 9 . 7 S t a t i o n L i s t
3 . 9 . 7 S t a t i o n L i s
Station List provides the knowledge Station List of connecting wireless clients now along
with its status code.
Available settings are explained as follows:
Item
MAC Address
SSID
Auth
Encrypt
Tx Rate/Rx Rate
Refresh
Add to Access
Control
checked.
Note: VigorAP 900 provides standard WMM configuration in
the web page. If you want to modify the parameters, please refer
to the Wi-Fi WMM standard specification.
"Uncheck" (default value) the box means the AP will answer the
response request while transmitting WMM packets through
wireless connection. It can assure that the peer must receive the
WMM packets.
"Check" the box means the AP will not answer any response
request for the transmitting packets. It will have better
performance with lower reliability.
t
Description
Display the MAC Address for the connecting client.
Display the SSID that the wireless client connects to.
Display the authentication that the wireless client uses for
connection with such AP.
Display the encryption mode used by the wireless client.
Display the transmission /receiving rate for packets.
Click this button to refresh the status of station list.
Client's MAC Address - For additional security of wireless
access, the Access Control facility allows you to restrict the
101
VigorAP 900 User's Guide