Table of Contents
Advertisement
Available settings are explained as follows:
Item
Enable Wireless LAN
Enable Limit Client
Mode
Enable 2 Subnet
(Simulate 2 APs)
VigorAP 900 User's Guide
Description
Check the box to enable wireless function.
Check the box to set the maximum number of wireless stations
which try to connect Internet through VigorAP. The number
you can set is from 3 to 64.
At present, VigorAP 900 can connect to 11b only, 11g only,
11n only, Mixed (11b+11g), Mixed (11g+11n) and Mixed
(11b+11g+11n) stations simultaneously. Simply choose Mixed
(11b+11g+11n) mode.
Check the box to enable the function for two independent
subnets. Once you enable this function, LAN-A and LAN-B
would be independent. Next, you can connect one router in
LAN-A, and another router in LAN-B. Such mechanism can
make you feeling that you have two independent AP/subnet
functions in one VigorAP 900.
If you disable this function, LAN-A and LAN-B ports are in
60
Advertisement
Table of Contents
Need help?
Do you have a question about the VigorAP 900 and is the answer not in the manual?