Table of Contents
Advertisement
3
.
1
O
p
e
r
a
t
i
o
n
3
.
1
O
p
e
r
a
t
i
o
n
This page provides several available modes for you to choose for different conditions. Click
any one of them and click OK. The system will configure the required settings
automatically.
Available settings are explained as follows:
Item
Wireless LAN(2.4GHz)
AP
AP Bridge-Point to
Point
AP Bridge-Point to
Multi-Point
AP Bridge-WDS
VigorAP 900 User's Guide
M
o
d
e
M
o
d
e
Description
This mode allows wireless clients to connect to access point and
exchange data with the devices connected to the wired network.
This mode can establish wireless connection with another
VigorAP 900 using the same mode, and link the wired network
which these two VigorAP 900s connected together. Only one
access point can be connected in this mode.
This mode can establish wireless connection with other VigorAP
900s using the same mode, and link the wired network which
these VigorAP 900s connected together. Up to 4 access points
can be connected in this mode.
This mode is similar to AP Bridge to Multi-Point, but access
point is not work in bridge-dedicated mode, and will be able to
accept wireless clients while the access point is working as a
wireless bridge.
32
Advertisement
Table of Contents
Need help?
Do you have a question about the VigorAP 900 and is the answer not in the manual?