Preparing The Camcorder; Attaching The Lens Hood; Using The Viewfinder - Canon Legria HF G25 Instruction Manual

Preparing the Camcorder

This section covers the basic preparations for the camcorder such as attaching the lens hood,
adjusting the grip belt and adjusting the viewfinder and LCD screen. When attaching the lens hood,
grip belt and straps, be careful not to drop the camcorder.

Attaching the Lens Hood

Attach the lens hood to protect the lens and reduce the
amount of stray light that may hit the lens. Remove the lens
cap before attaching the lens hood.
Place the lens hood on the front of the lens so that the
groove on the lens hood is aligned with the bottom of
the lens ( ), and then turn the lens hood clockwise until
it stops with a click
• Be careful not to deform the lens hood.
• Make sure that the lens hood is aligned with the thread.
• To remove the lens hood, turn it counterclockwise.

Using the Viewfinder

If it is difficult to use the LCD screen while the LCD backlight is on (A 23), you can use the viewfinder.
You can also use the viewfinder when you rotate the LCD panel 180 degrees to let the subject watch
the recording.
1 Pull out the viewfinder.
2 Press P to turn on the camcorder.
3 Adjust the viewfinder using the dioptric adjustment
lever.
• You can close the LCD panel or rotate it toward the
subject as you prefer.
• The LCD backlight setting (A 23) is common to the LCD
screen and the viewfinder.
Downloaded From VideoCamera-Manual.com Manuals
( )
.
Preparing the Camcorder
Dioptric adjustment lever
21