Canon Legria HF G25 Instruction Manual page 148

Appendix: Menu Options Lists
[LCD Screen Dimmer]:
the camcorder in locations where the LCD's illumination could become a nuisance to others. Hold
D pressed down for about 2 seconds to restore the LCD screen to its previous brightness setting.
• Dimming the LCD screen does not affect the brightness of your recordings or the brightness of the
playback image on a TV.
• When the screen dimmer is set to [j Off], the LCD screen will return to the brightness level that
was in use before the screen was dimmed.
148
[LCD Mirror Image]:
check the image while you record. While the LCD panel is rotated toward the subject you will not be
able to decorate the scene.
[Notification Sounds]:
timer countdown, etc.
• While pre-recording (A 81) is activated, the camcorder will not emit any notification sounds.
[Wireless Remote Control]:
[Powered IS Button]:
(A 55).
[Î Press and Hold]: Powered IS will be activated while you hold the button pressed down.
[Ï Toggle On/Off]: Each press of the button will turn the Powered IS function on and off.
[Set WB Priority]:
current white balance and the white balance setting selected for [Set WB Priority].
[Focus Ring Direction]:
[Focus Ring Response]:
[Focus Preset Speed]:
[Power Saving Mode]:
[Auto Power Off]: In order to save power when the camcorder is powered by a battery pack, it will
automatically shut off if left without any operation for 5 minutes.
• Approximately 30 seconds before the camcorder shuts off, [Auto Power Off] will appear.
• In standby mode, the camcorder will shut off after the time selected for the [Quick Start (Standby)]
setting.
[Quick Start (Standby)]: Select whether to activate the Quick Start function (A 44) when you close the
LCD panel in a recording mode and the length of time after which the camcorder will end the standby
mode and shut off automatically.
• You can set Quick Start to [Off], for example, if the camcorder is set on a fixed position and you
want to keep recording video with the LCD panel closed in order to conserve the battery's power.
[Battery Info]:
When you are using a battery pack that is compatible with Intelligent System, this option
displays a screen where you can verify the battery charge (as a percentage) and the remaining
recording time (
Downloaded From VideoCamera-Manual.com Manuals
When set to [i On], the LCD screen is dimmed. Doing so is ideal when using
When set to [i On], you can rotate the LCD panel 180 degrees to let the subject
A beep will accompany some operations like turning on the camcorder, the self-
Allows the camcorder to be operated with the wireless controller.
Determines the operation mode of the assignable button set to [È Powered IS]
You can press an assignable button set to [Ä WB Priority] to switch between the
Changes the direction the focus ring needs to be turned.
Selects the sensitivity of the response when operating the focus ring.
Determines the speed at which the focus changes to the preset position.
Controls the camcorder's automatic power off settings.
, mode) or playback time ( , mode).