Dividing Scenes - Canon Legria HF G25 Instruction Manual

Dividing Scenes

You can divide scenes in order to leave out the best parts and later cut out the rest.
Operating modes:
1 Play back the scene you want to divide.
2 Pause the playback at the point where you want to divide the scene.
3 Open the scene division screen.
>
[Edit] [Divide]
4 Bring the scene to a precise point, if necessary.
• Playback controls will appear on the screen (A 88). Use any special playback modes (fast
playback, frame reverse/advance) as necessary to locate the desired point.
5 Divide the scene.
>
[µ Divide]
• The video from the division point to the end of the scene will appear as a new scene in the index
screen.
NOTES
• When advancing/reversing frames while dividing the scenes, the interval between frames is about
0.5 seconds.
• If the scene cannot be divided at the point where you paused the playback, advance/reverse a
frame and then divide the scene.
• During the playback of a scene that was divided, you may notice some anomalies in the picture/
sound at the point where the scene was cut.
• The following scenes cannot be divided:
- Scenes that are too short (less than 3 seconds).
- Scenes that were edited using the supplied software VideoBrowser and were then transferred to
a memory card connected to the computer.
• Scenes cannot be divided within 1 second from the beginning or the end of the scene.
Downloaded From VideoCamera-Manual.com Manuals
[Yes]
Dividing Scenes
95