Pre-Recording - Canon Legria HF G25 Instruction Manual

Pre-Recording

The camcorder will start recording 3 seconds before you press Y, ensuring you do not miss
important shooting opportunities. This is especially useful when it is difficult to predict when to start
recording.
By default, the pre-recording function is assigned to assignable button 2.
Operating modes:
1 Press
• z will appear on the screen.
• Press
2 Press Y.
• The scene recorded in the memory will start 3
seconds before Y was pressed.
NOTES
• The camcorder will not record the full 3 seconds prior to pressing Y if the button was
pressed within 3 seconds of having turned on pre-recording or having finished the previous
recording.
• Any of the following actions will deactivate the pre-recording function.
- Leaving the camcorder without any operation for 1 hour.
- Changing the position of the mode switch.
- Pressing T.
- Activating video snapshot.
- Opening the decoration screen.
- Setting the camcorder to standby mode.
- Touching any of the following control buttons in the FUNC. panel: [MENU], [Rec. Programs],
[Ä White Balance], [x AGC Limit], [— Audio Scene], [Image Stabilizer], [R Faders],
[Ò Decoration] or [w Review Recording].
Downloaded From VideoCamera-Manual.com Manuals
.
again to turn off pre-recording.
Pre-Recording
81