Cautions For The Power Source - Epson PP-1002 User Manual

Cautions for the Power Source

Do not connect or disconnect the power plug with wet hands.
This may result in electric shock.
WARNING
Use only the type of power source indicated on the product's label.
Use of the wrong type of power source may result in electric shock or fire.
Do not plug the power cord into an outlet with many other cords connected to
it.
This may result in heat build-up and fire.
Do not use a damaged power cord.
This may result in electric shock or fire.
If the power cord is damaged, consult your dealer for repairs.
Observe the following when handling the power cord.
• Do not modify the power cord
• Do not place heavy objects on the power cord
• Do not bend, twist or pull the power cord by force
• Do not wire the cord near heating appliances
Be careful when handling the power plug.
Mishandling may result in fire.
• Do not leave plugged into a power source with foreign matter such as dust
on it
• Firmly insert the prongs of the power plug all the way
When you disconnect the power plug from the outlet, be sure to turn off the
power and hold the plug as you pull.
If you stretch the power cord, it may become damaged, which could result in
electric shock or fire.
Use only the power cord supplied with the product. Also, do not use the power
cord supplied with this product with any other devices.
This may result in electric shock or fire.
For safety reasons, be sure to ground the power cord.
The power cord supplied with the product has a 3-pin cable with a power
system grounding (PE) terminal, so connect it to an outlet that is grounded
securely.
Regularly disconnect the power plug from the outlet and clean the base of the
prongs and between the prongs.
If you leave the power plug connected to an outlet for a long time, the base
of the power plug prongs may become dusty, which may result in short circuit
and fire.
For safety, be sure to disconnect the power plug from the outlet when you will
not be using the product for a long time.
CAUTION
8