Lights For The Status Of The Product - Epson PP-1002 User Manual

Lights for the Status of the Product

This section describes the status of the product using the lights displayed on the control panel.
The status of the product is also indicated by the combination of lights flashing/turning on. See
Errors" on page 114 for details.
PP-100II/PP-100/PP-100AP
Indicator light
Power light
BUSY BUSY light
ERROR ERROR light
INK INK light
18
Flashing/On
On The power is on.
When only the Power light is on, the product is on
standby for data.
Flashing Product is being initialized.
When it flashes rapidly, it is shutting down
Product is processing a job.
Flashing
For the PP-100II, PP-100, or PP-100AP , when the BUSY
light is flashing rapidly, a disc is being ejected, so do
not pull out Stacker 4. Discs may be damaged.
On The cover, disc transport system, stacker, drive, or
printer is experiencing an error.
Flashing The unit is experiencing a problem.
The ink cartridge has reached its replacement time,
On
the ink cartridge is not correctly installed, or incorrect
ink cartridge is installed.
For information on replacing ink cartridges, see
"Replacing the Ink Cartridge" on page
The ink is low. Obtain a replacement ink cartridge.
For the PP-100II or PP-100, when all INK lights flash
Flashing
rapidly, the maintenance box has reached its
replacement time or is not correctly inserted.
For information on replacing maintenance box, see
"Replacing the Maintenance Box (Only for PP-100II/
PP-100AP)" on page
"Checking Lights for
PP-50
Status
81.
103.