Opening/Closing The Disc Cover; Opening The Disc Cover - Epson PP-1002 User Manual

Opening/Closing the Disc Cover

When you load discs into the input stackers or take out discs from the output stackers, open and close the disc cover
as described below.

Opening the Disc Cover

Hold the handle, and open the disc cover in the direction indicated by the arrow in the
illustration below.
For PP-100II/PP-100
• Do not open the disc cover while a job is being processed (while the BUSY light is
flashing). This could adversely affect the writing or printing quality.
• If a job is being processed (while the BUSY light is flashing) and you need to open the
disc cover to load or take out discs, first pause the job and then open the disc cover.
See
• If you open the disc cover while a job is being processed (while the BUSY light is
flashing), an alarm beep sounds and the current job enters the standby status. Closing
the disc cover automatically resumes the job.
• While an alarm beep is sounding, the arm is moving. To ensure safety, do not put your
hands inside the product. Also, do not operate any stackers while an alarm beep is
sounding. This could damage the arm.
For PP-100AP/PP-50
• If you open the disc cover while a job is being processed (while the BUSY light is
flashing), make sure the internal light has turned off and that the arm has stopped
moving before performing any operation, such as loading or taking out discs. Do not
put your hands inside the product or operate any stackers while the arm is moving. Also,
open and close the disc cover gently.
• If you open the disc cover while a job is being processed (while the BUSY light is
flashing), the current job enters the standby status. Closing the disc cover automatically
resumes the job.
"Pausing/Cancelling Jobs" on page 73 for the procedure to pause a job.
Basic Operations
21