Replacing the Drive (Only for PP-100II)
When a drive has reached the end of its service life, writing errors can easily occur. In that case, replace the drive. You
can replace the drives of the PP-100II yourself.
• Be sure to follow the instruction manual of the PP-100II exclusive optional drive to
replace the drive.
• Both drive 1 and drive 2 must be installed. Otherwise, the PP-100II will not operate.
• In Mac OS, the PP-100II will not operate when the optional BD drives are installed on it.
How to Check When it is Time to Replace the Drive
You can check the service life of the drives with EPSON Total Disc Utility. (See
on page
100.)
For EPSON Total Disc Utility, see
How to Replace the Drive
See the instruction manual of the drive to replace the drive.
See
"Drive (Only for PP-100II)" on page 151
"EPSON Total Disc Utility" on page 39
for the drive model number.
"Checking Maintenance Information"
or EPSON Total Disc Utility Help.
Maintenance
105