After Installation; After Installing This Navigation System - Pioneer AVIC-F700BT Operation Manual

Section
D (
After Installation
)
(~----)
After Installing this
Navigation System
1 Reconnecting the battery.
First, double-check that all connections are
correct and that this product is installed cor-
rectly. Reassemble all vehicle components
that you previously removed. Then reconnect
the negative (-) cable to the negative (-) term-
inal of the battery.
2 Start the engine.
3 Press RESET button.
Press RESET button on the navigation unit
using a pointed object such as the tip of a
pen.
,.0;5
: / 88
-0
I~ ~ ~==--============'.J
4 Make the following settings:
~
Fat' details concel'ning operations, refer to
';Opemtion Manual",
1 Set the language.
2 Drive an unobstructed road until the GPS
statis receivlllg tile signal normally
3 Make some necessmy adjustments.
• Setting the time
• Setting the units and the date format.
etc,
• Change other settings as you pt'efet'
• Note
Aftet' Installing this naVigation system. be sure to
check at a safe place that the vehicle is perfoml-
ing not'mally.
0
00
En