Searching For Nearby Phones; Searching For A Specified Phone - Pioneer AVIC-F700BT Operation Manual

( Using hands-free phoning
Searching for nearby phones
The system searches for available cellular
phones near the navigation system and dis-
plays them in a list, and registers them for
connection.
Chapter
).
A message prompti ngs you to enter a PI N
code appears.
7 Enter the PIN code "1111" using the cel-
lular phone.
1 Activate the Bluetooth wireless tech-
nology on your cellular phone.
For some cellular phones, no specific action is
necessary to activate Bluetooth wireless tech-
nology. For details, refer to the instruction
manual of your cellular phone.
2 Touch [Phone Settings] on the "Phone
Menu".
~
For detai Is, refer to
Displaying the
Phone
Menu on the previous page.
3 Touch [Connection].
4 Touch [Add Device], and then [Search
devices].
The system searches for cellular phones with
Bluetooth technology that are waiting for the
connection and displays them in the list if the
device has found.
o
Up to 10 cell ular phones will be listed in the
order that the cellu lar phone is fou nd.
5 Wait until your cellular phone appears
in the list.
o
If you cannot find the cellular phone you
want to connect, check that the cellular
phone is waiting for the Bluetooth wireless
technology connection.
6 Touch the cellular phone name you
want to register.
When a connection is successfully estab-
lished, a connection complete message ap-
pears, the screen returns to the "Phone
Settings" menu by touching [OK].
Searching for a specified phone
If you cannot connect your phone in the regu-
lar two methods previously described, try this
method if your phone is found in the list.
1 Activate the Bluetooth wireless tech-
nology on your cellular phone.
For some cellular phones, no specific action is
necessary to activate Bluetooth wireless tech-
nology. For details, refer to the instruction
manual of your cellular phone.
2 Touch [Phone Settings] on the "Phone
Menu".
~
For details, refer to
Displaying the
Phone
Menu on the previous page.
3 Touch [Connection].
4 Touch [Add Device], and then [Select
specific devices].
En
®