Installation; When Installing The Antenna Inside The Vehicle (On The Rear Shelf) - Pioneer AVIC-F700BT Operation Manual

Hide thumbs Also See for AVIC-F700BT:
Table of Contents

Advertisement

)
Section
to (
Installation
When installing the antenna
inside the vehicle (on the rear
shelf)
Affix the metal sheet on as level a surface as
possible where the GPS antenna faces the
window. Place the GPS antenna on the metal
sheet. (The GPS antenna is fastened with its
magnet.)
(~----)
Metal Sheet
GPS
aInna/
:~~'h~f~e~,e
pealect"e sheel
~/')
Make sure the surface is
-~
~;...'I..9"""~)
free of moisture. dust,
--==~
grime. oil, etc" before
_
~
;,:o::emel a l sheet
The metal sheet contains a
strong adhesive which may
leave a mark on the surface if
it is removed.
Clamps
Use clamps to secure the
lead where necessary inside
the vehicle .
Notes
When attaching the metal sheet, do not cut
it into small pieces.
• Some models use window glass that does
not allow signals from GPS satellites to
pass through. On such models, install the
GPS antenna on the outside of the vehicle.
®
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avic-f7010btAvic-f900bt

Table of Contents