Pioneer AVIC-F700BT Operation Manual page 135

Chapter
• (using the radio
(AM)
You can listen to the radio by using this navi-
gation system. This section describes opera-
tions for radio (AM).
• Touch [AM] on the "AV Source" menu
to display the" AM" screen.
~
For details concerning operations, refer to
Screen switching oveNiew on page 18.
Reading the screen
CD
Source icon
Shows which source has been selected.
®
Preset number indicator
Shows what preset item has been selected.
®
Frequency indicator
@) Signal level indicator
®
LOCAL indicator
Shows when local seek tuning is on.
C!J
Using the touch panel keys
CD
Recalls equalizer curves
~
For details, refer to Recalling equalizer
curves on page 140.
®
Displaying the "Function" menu
(106)
En
)
~
For details, refer to Using the
"Function" menu on the next page.
®
Select a preset channel
... or ~ can be used to switch presets.
@) Perform manual tuning
To perform manual tuning, touch [...] or [~]
briefly. The frequencies move up ordown one
step at a ti me.
Perform seek tuning
To perform seek tuning, keep touching [...] or
[~]
for about one second and release. The
tu ner wi II scan the frequencies until a broad-
cast strong enough for good reception is
found.
o
You can cancel seek tuning by touching
either [...] or
[~]
briefly.
o
If you keep touching [...] or
[~],
you can
skip broadcasting frequencies. Seek
tuning will start as soon as you release
the keys.
o
Moving
MULTI-CONTROL
left or right
enables you to perform the equivalent
operations.
®
Displaying the map screen
Switching between the
detailed information display
and the preset list display
You can switch the left side of the basic screen
according to your preference.
'-AM
{IV
530 k·
z
EQ Func
Pi : 530
kHz
..... P.(h
..
P2 600
kHz
P3 .1000 kHl
..... Seck ..
p<:. . 1400 kH7
P5
1710 kHz
P6 :1+10 kHz
JctJi
'/
~:
• Touch [Preset] (or [Detail]).
Each touch of [Preset] (or [Detail]) changes
the detailed information display or preset list
display.